LPC2119FBD64解密最新优惠信息

    LPC2119FBD64是PHILIPS系列疑难解密单片机系列之一，LPC2119FBD64单片机解密在行业内一直由于解密难度较大，解密费用较高，成为许多解密公司及客户的一大困扰，深圳芯片解密研究所下属的专业PHILIPS解密攻关实验室经过集中技术开发和破解，目前已经能够为客户提供高可靠性和低成本的LPC2119FBD64解密方案。
    依托最新技术研究成果，深圳芯片解密研究所推出LPC2119FBD64解密最新优惠，凡在我研究所进行LPC2119FBD64解密项目合作的所有新老客户均可以享受LPC2119FBD64解密低价优惠，同时保证解密成功率100%，解密周期短，可靠性强，有解密需求者请与我们联系：
    解密咨询电话：086-0755-82221641，82173891
    联系人：魏小姐
    咨询QQ：418219082
    LPC2119FBD64单片机主要特征介绍：
16/32-bit ARM7TDMI-S microcontroller in a tiny LQFP64 package.
16 kB on-chip Static RAM.
128/256 kB on-chip Flash Program Memory. 128-bit wide interface/accelerator
enables high speed 60 MHz operation.
In-System Programming (ISP) and In-Application Programming (IAP) via on-chip
boot-loader software. Flash programming takes 1 ms per 512 byte line. Single
sector or full chip erase takes 400 ms.
EmbeddedICE-RT interface enables breakpoints and watch points. Interrupt
service routines can continue to execute while the foreground task is debugged
with the on-chip RealMonitor? software.
Embedded Trace Macrocell enables non-intrusive high speed real-time tracing of
instruction execution.
Two interconnected CAN interfaces with advanced acceptance filters.
Four channel 10-bit A/D converter with conversion time as low as 2.44 ms.
Multiple serial interfaces including two UARTs (16C550), Fast I2C (400 kbits/s)
and two SPIs
60 MHz maximum CPU clock available from programmable on-chip
Phase-Locked Loop with settling time of 100 ms.
Vectored Interrupt Controller with configurable priorities and vector addresses.
Two 32-bit timers (with four capture and four compare channels), PWM unit (six
outputs), Real Time Clock and Watchdog.
Up to forty-six 5 V tolerant general purpose I/O pins. Up to nine edge or level
sensitive external interrupt pins available.
On-chip crystal oscillator with an operating range of 1 MHz to 30 MHz.
Two low power modes, Idle and Power-down.
Processor wake-up from Power-down mode via external interrupt.
Individual enable/disable of peripheral functions for power optimization.
Dual power supply:
CPU operating voltage range of 1.65 V to 1.95 V (1.8 V ±0.15 V).
I/O power supply range of 3.0 V to 3.6 V (3.3 V ± 10 %) with 5 V tolerant I/Opads.