CYPRESS系列单片机解密是橙盒科技近期以来在解密技术上取得重大突破性进展的典型芯片解密系列，针对CY8C201A0-LDX26芯片解密等CYPRESS全系列单片机，橙盒科技针对每一颗芯片均经过多次解密试验及实际解密过程验证，解密方案已经较为成熟，可以最大限度确保解密的成功率和可靠性。
如果客户有CY8C201A0-LDX2芯片解密等CYPRESS系列单片机解密需求，请与橙盒科技联系咨询更多解密详情
橙盒科技芯片解密咨询电话：0755- 82173891，82173585
咨询QQ：1357273089，994589503
Email：chkeji@126.com
Operating Modes of I C Commands
Normal Mode
In normal mode of operation, the acknowledgment time is
optimized. The timings remain approximately the same for
different configurations of the slave. To reduce the acknowl-
edgment times in normal mode, the registers 0x06-0x09, 0x0C,
0x0D, 0x10-0x17, 0x50, 0x51, 0x57-0x60, 0x7E are given only
read access. Write to these registers can be done only in setup
mode.
Setup Mode
All registers have read and write access (except those which are
read only) in this mode. The acknowledgment times are longer
compared to normal mode. When CapSense scanning is
disabled (command code 0x0A in command register 0xA0), the
acknowledgment times can be improved to values similar to the
normal mode of operation.
Device Operation Modes
CapSense Express devices are configured to operate in any of
the following three modes to meet different power consumption
requirements
■ Active Mode
■ Periodic Sleep Mode
■ Deep Sleep Mode
Active Mode
In the active mode, all the device blocks including the CapSense
sub system are powered. Typical active current consumption of
the device across the operating voltage range is 1.5 mA.
