橙盒芯片解密研究所专业提供MC9S08AC128解密等MC9S08系列单片机解密服务，MC9S08AC128解密是目前我们成功破解的典型单片机系列。MC9S08系列单片机解密一直以来是解密行业的一大疑难，在单片机解密领域整个行业的解密技术还不太成熟，部分型号还处于方案开发与研究中。橙盒芯片解密研究所在MC9S08系列单片机解密领域的重大突破将为越来越多的电子企业及电子工程师的学习研究与参考设计提供完善的技术支持。
有MC9S08AC128解密等MC9S08系列单片机解密需求者请与橙盒芯片解密研究所联系咨询详情
芯片解密咨询电话：0755-82221641，82173585
咨询QQ：418219082
Email：chkeji@126.com
MC9S08AC128特性介绍：
8-Bit HCS08 Central Processor Unit (CPU)
40-MHz HCS08 CPU (central processor unit)
20-MHz internal bus frequency
HC08 instruction set with added BGND, CALL and
RTC instructions
Memory Management Unit to support paged memory.
Linear Address Pointer to allow direct page data accesses of the entire memory map
Development Support
Background debugging system
Breakpoint capability to allow single breakpoint setting during in-circuit debugging (plus two more breakpoints in on-chip debug module)
On-chip in-circuit emulator (ICE) Debug module containing three comparators and nine trigger modes. Eight deep FIFO for storing change-of-flow addresses and event-only data. Supports both tag and force breakpoints.
Memory Options
Up to 128K FLASH — read/program/erase over full operating voltage and temperature
Up to 8K Random-access memory (RAM)
Security circuitry to prevent unauthorized access to RAM and FLASH contents
Clock Source Options
Clock source options include crystal, resonator,external clock, or internally generated clock with precision NVM trimming using ICG module
System Protection
Optional computer operating properly (COP) reset with option to run from independent internal clock source or bus clock
CRC module to support fast cyclic redundancy checks on system memory
Low-voltage detection with reset or interrupt
Illegal opcode detection with reset
Master reset pin and power-on reset (POR)
Power-Saving Modes
Wait plus two stops
Peripherals
ADC — 16-channel, 10-bit resolution, 2.5 μs conversion time, automatic compare function,temperature sensor, internal bandgap reference channel
SCIx — Two serial communications interface modules supporting LIN 2.0 Protocol and SAE J2602 protocols; Full duplex non-return to zero (NRZ);Master extended break generation; Slave extended break detection; Wakeup on active edge
SPIx — One full and one master-only serial peripheral interface modules; Full-duplex or single-wire bidirectional; Double-buffered transmit and receive; Master or Slave mode; MSB-first or LSB-first shifting
IIC — Inter-integrated circuit bus module; Up to 100 kbps with maximum bus loading; Multi-master operation; Programmable slave address; Interrupt driven byte-by-byte data transfer; supports broadcast mode and 10 bit addressing
TPMx — One 2-channel and two 6-channel 16-bit timer/pulse-width modulator (TPM) modules:Seectable input capture, output compare, and edge-aligned PWM capability on each channel. Each timer module may be configured for buffered,centered PWM (CPWM) on all channels
KBI — 8-pin keyboard interrupt module
Input/Output
Up to 70 general-purpose input/output pins
Software selectable pullups on input port pins
Software selectable drive strength and slew rate control on ports when used as outputs
Package Options
80-pin low-profile quad flat package (LQFP)
64-pin quad flat package (QFP)
44-pin low-profile quad flat package (LQFP)
