LPC2101芯片解密/单片机解密是橙盒科技在PHILIPS系列LPC单片机解密技术研究中成功破解的典型IC芯片型号，LPC单片机解密是PHILIPS系列较高难度IC解密类型，橙盒科技长期以来在疑难IC芯片解密研究领域积累了系列技术成果，目前，可以针对多种行业高难度IC芯片提供高效可靠的解密服务。
有LPC2101芯片解密/单片机解密等LPC系列单片机解密需求者欢迎与橙盒科技联系咨询更多解密详情
芯片解密咨询电话：0755- 82221641，82173585
咨询QQ：1357273089，994589503
Email：chkeji@126.com
LPC2101 Key features
16-bit/32-bit ARM7TDMI-S microcontroller in a tiny LQFP48 package.
2 kB/4 kB/8 kB of on-chip static RAM and 8 kB/16 kB/32 kB of on-chip flash program memory. 128-bit wide interface/accelerator enables high-speed 70 MHz operation.
ISP/IAP via on-chip bootloader software. Single flash sector or full chip erase in 100 ms and programming of 256 bytes in 1 ms.
EmbeddedICE RT offers real-time debugging with the on-chip RealMonitor software.
The 10-bit A/D converter provides eight analog inputs, with conversion times as low as 2.44 ms per channel and dedicated result registers to minimize interrupt overhead.
Two 32-bit timers/external event counters with combined seven capture and seven compare channels.
Two 16-bit timers/external event counters with combined three capture and seven compare channels.
Low power Real-Time Clock (RTC) with independent power and dedicated 32 kHz clock input.
Multiple serial interfaces including two UARTs (16C550), two Fast I2C-buses (400 kbit/s), SPI and SSP with buffering and variable data length capabilities.
Vectored interrupt controller with configurable priorities and vector addresses.
Up to thirty-two 5 V tolerant fast general purpose I/O pins.
Up to 13 edge or level sensitive external interrupt pins available.
70 MHz maximum CPU clock available from programmable on-chip PLL with a possible input frequency of 10 MHz to 25 MHz and a settling time of 100 ms.
On-chip integrated oscillator operates with an external crystal in the range from 1 MHz to 25 MHz.
Power saving modes include Idle mode, Power-down mode with RTC active, and Power-down mode.
Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power optimization.
Processor wake-up from Power-down mode via external interrupt or RTC.
