C8051系列单片机是目前应用最广泛的单片机之一，橙盒科技利用自身强硬技术，先进设备，响应市场需求，针对C8051系列单片机成立专业解密小组反复试验研究，最终制定出此系列芯片对应的所有解密方案。
下面以C8051系列——C8051F062芯片功能特性介绍为例，详细阐述了C8051F062的主要功能以便给广大客户参考借鉴，如您对C8051F062芯片或其他C8051系列芯片解密有所需要，热烈欢迎您用下面的咨询方式联系我们，将为您提供最优质的服务。
橙盒科技芯片解密咨询电话：0755-82173891，82173585
咨询QQ：1357273089，994589503
Email：chkeji@126.com
Analog Peripherals
Two 16-Bit ADCs
-±1.5 LSB INL; guaranteed no missing codes
-Programmable throughput up to 1 Msps (each ADC)
-Configurable as two single-ended or one differential ADC
-DMA to XRAM or external memory interface
-Data-dependent windowed interrupt generator
10-Bit ADC
-Programmable throughput up to 200 ksps
-8 external inputs
-Built-in temperature sensor (±3 °C)
Two 12-Bit DACs
-Can synchronize outputs to timers for jitter-free waveform generation
Three Comparators
Internal Voltage Reference
Precision VDD Monitor/Brown-out Detector
On-Chip JTAG Debug & Boundary Scan
-On-chip debug circuitry facilitates full speed, non-intrusive in-system debug (no emulator required)
-Provides breakpoints, single stepping, watchpoints, stack monitor
-Inspect/modify memory and registers
-Superior performance to emulation systems using ICE-chips, target pods, and sockets
-IEEE1149.1 compliant boundary scan
Supply Voltage: 2.7 to 3.6 V
-Typical operating current: 10 mA at 25 MHz
-Multiple power saving sleep and shutdown modes
High-Speed 8051 霤 Core
-Pipelined instruction architecture; executes 70% of instructions in 1 or 2 system clocks
-Up to 25 MIPS throughput with 25 MHz system clock
-Expanded interrupt handler
Memory
-4352 bytes data RAM
-64 kB Flash; in-system programmable in 1024-byte sectors (1024 bytes are reserved)
-External parallel data memory interface
CAN Bus 2.0B
-32 message objects
-”Mailbox" implementation only interrupts CPU when needed
Digital Peripherals
-24 port I/O; all are 5 V tolerant
-Hardware SMBus? (I2C? compatible), SPI?, and two UART serial ports available concurrently
-Programmable 16-bit counter array with 6 capture/compare modules
-5 general-purpose 16-bit counter/timers
-Dedicated watchdog timer; bidirectional reset
-Real-time clock mode using timers or PCA
Clock Sources
-Internal programmable 2% oscillator: up to 24.5 MHz
-External oscillator: Crystal, RC, C, or Clock
100-Pin TQFP
-Temperature Range: –40 to +85 °C
Two 16-Bit ADCs
-±1.5 LSB INL; guaranteed no missing codes
-Programmable throughput up to 1 Msps (each ADC)
-Configurable as two single-ended or one differential ADC
-DMA to XRAM or external memory interface
-Data-dependent windowed interrupt generator
10-Bit ADC
-Programmable throughput up to 200 ksps
-8 external inputs
-Built-in temperature sensor (±3 °C)
Two 12-Bit DACs
-Can synchronize outputs to timers for jitter-free waveform generation
Three Comparators
Internal Voltage Reference
Precision VDD Monitor/Brown-out Detector
On-Chip JTAG Debug & Boundary Scan
-On-chip debug circuitry facilitates full speed, non-intrusive in-system debug (no emulator required)
-Provides breakpoints, single stepping, watchpoints, stack monitor
-Inspect/modify memory and registers
-Superior performance to emulation systems using ICE-chips, target pods, and sockets
-IEEE1149.1 compliant boundary scan
Supply Voltage: 2.7 to 3.6 V
-Typical operating current: 10 mA at 25 MHz
-Multiple power saving sleep and shutdown modes
High-Speed 8051 霤 Core
-Pipelined instruction architecture; executes 70% of instructions in 1 or 2 system clocks
-Up to 25 MIPS throughput with 25 MHz system clock
-Expanded interrupt handler
Memory
-4352 bytes data RAM
-64 kB Flash; in-system programmable in 1024-byte sectors (1024 bytes are reserved)
-External parallel data memory interface
CAN Bus 2.0B
-32 message objects
-”Mailbox" implementation only interrupts CPU when needed
Digital Peripherals
-24 port I/O; all are 5 V tolerant
-Hardware SMBus? (I2C? compatible), SPI?, and two UART serial ports available concurrently
-Programmable 16-bit counter array with 6 capture/compare modules
-5 general-purpose 16-bit counter/timers
-Dedicated watchdog timer; bidirectional reset
-Real-time clock mode using timers or PCA
Clock Sources
-Internal programmable 2% oscillator: up to 24.5 MHz
-External oscillator: Crystal, RC, C, or Clock
100-Pin TQFP
-Temperature Range: –40 to +85 °C
